Glass splashback 900mm x 750mm

Please choose your required colour from our list of standard colours. We do recommend that a sample is seen prior to ordering. Samples can be requested here.  If drill holes are required for fixing these will be placed 50mm in from each edge, in the 4 corners, unless stated otherwise.  If using adhesive, we recommend that you purchase with the order as some others can react with the paint on the back of the splashback.  Your splashback will be delivered 10-15 working days from order.

    4 x Drill Holes With Screw Fixings

    Adhesive for fixing


Technical specification

All splashbacks are supplied as 6mm toughened glass, to meet BS EN 12150 and carry the CE Mark, with a polished edge finish and a clear, safety backing film applied as standard. Our coloured splashbacks are completely opaque and do not transmit any light.


Installation method

Our glass splashbacks can be installed by either of the following options:

  • Adhesive – We strongly recommend using our adhesive, which can be purchased along with your splashback. This can be applied to the back of the splashback (on top of the safety backing film), following the instructions on the adhesive tube supplied, and the glass then pressed firmly to the wall. Please note, that where installing a glass splashback where there is no support underneath the bottom edge, a temporary batton will need to be screwed to the wall in order to take the weight of the glass whilst the adhesive cures.
  • Screw Fixings – These can be purchased along with your glass splashback, and the glass pre-drilled accordingly. The glass will need to be offered up to the required space for which it is intended and the screw hole locations marked. Ensure the relevant raw plugs are used, once holes are drilled into the wall. Place the black rubber grommets into the holes, which will protect the glass against the metal screws. Install the glass, by means of feeding the screws through the rubber grommets, and into the raw plugs. DO NOT overtighten the screws, as this can cause the glass to break! Once the screws are in place, screw the cover cap onto the head of the screw.

Delivery & Returns

Delivery & Carriage Charges

Goods will be dispatched from our warehouse within 15 working days and any estimated dispatch date is an estimate, which can change without notice. Dispatch may be delayed in accordance with point 4.11.

Your order may arrive in more than one delivery.

We will deliver the goods to the premises you specify on your order. You must be at home to accept delivery of your order, which is between 7:30am and 6:00pm Monday-Friday.

Some of our products are relatively weighty items and you will be required to assist the driver in offloading your order.

Disposal of packing materials is your responsibility.

If there is no one to accept the order on the scheduled delivery date the goods may be returned to the factory and we reserve the right to charge you an additional re-delivery charge.

If you change the delivery address once the goods have been dispatched to you, we reserve the right to pass on any extra charges for redirecting your delivery. This may delay your delivery.

Please check the goods on delivery – any goods found to be missing or damaged should be notified to the delivery driver at the time of delivery or ourselves within 24 hours of delivery of the items.

If the goods are lost or damaged please report this to us within 24 hours from the delivery day.

Deliveries are made to a ground floor entrance only and on the condition that there is reasonable access for the safe and prompt delivery of the goods.

Sometimes, for reasons beyond our control we may be prevented from delivering your goods as planned. These might include things such as accidents, breakdowns, fire, flood, storm, severe weather, acts of god, war, riot, civil commotion, malicious damage or the default of our suppliers. We are not responsible where this causes a delay or failure in delivering your goods.

Time is not the essence of the contract unless expressly stated otherwise in writing by a Director of the Company.

Cancellation, Refunds and Returns

All products are bespoke and made to order, therefore any costs which may have been incurred at the point of cancellation will be deducted from the refunded amount.

If items have been produced correctly to your order and are within our manufacturing tolerances, items cannot be returned for a refund, as they have been made specifically to your requirements.

By placing an order with us you are entering into a contract between you, the customer, and UA Glass Ltd. This contract does not entitle you to a 7 day cooling off period.

If the goods appear to be defective, we will advise whether they should be returned, in which case, we will advise how to pack them ready for collection. Upon inspection of the goods, a decision will be made as to whether the goods are unfit for purpose. If it was deemed that the goods were defective a refund will be made, including carriage costs, or a free of charge replacement will be offered. In the instance of a free of charge replacement being manufactured, the standard lead time must be accepted.

Once the goods have been removed from their packaging we do not accept liability for damage, such as scratches or chipped edges. If, upon delivery, the packaging appears damaged, please take photos of the affected area and email with any description to

Any defect/damage must be reported to us within 24 hours of delivery. Beyond this time we do not take responsibility for any damaged items, where reasonable opportunity has been given for the damage to occur during handling or storage in this period.

We will not be held liable for fitters fees or any other professional trades persons fees due to late, damaged or lost deliveries.